Gas

GTP Documents

For further information please contact your relevant Gas Distribution Network Operator

Forms

Meter Point Isolation Label

Request for Authorisation to Install a Meter Bypass

Request for Authorisation to undertake the setting and sealing of meter regulators on low pressure installations with a badged capacity not exceeding 6m³/hour.

Request for GT approval for meter housing / accommodation

ENA - GT1 Standard Form for Requesting Information on Pressure and Capacity - V1.1 Aug2015

ENA - GT2 Customer Warrant Type A -  V1.4 Jan2014
Customer warrant for submission with GT2 form C4B.
(Request for Authorisation to undertake the setting and sealing of the meter regulator, associated pressure control and protection devices on a low pressure, non-standard or higher pressure installation with a metering pressure other than 21 mbar).

ENA - GT2 Customer Warrant Type B -  V1.0 Jan2014
Customer warrant for submission with GT2 form C4B.
(Request for Authorisation to undertake the setting and sealing of the meter regulator, associated pressure control and protection devices on a low pressure, non-standard or higher pressure installation with a metering pressure other than 21 mbar).

ENA - GT2 Form C1 V1.1 Jan2014
Request for Authorisation to undertake the setting and sealing of meter regulators on low pressure installations with a badged capacity not exceeding 6m³/hour.

ENA GT2 Form C1 V1.2 Aug2015
Request for Authorisation to undertake the setting and sealing of meter regulators on low pressure installations with a badged capacity not exceeding 6m³/hour.

ENA - GT2 Form C2 V1.1 Jan2014
Request for Authorisation to undertake the setting and sealing of meter regulators on medium pressure installations with a badged capacity not exceeding 6m³/hour.

ENA - GT2 Form C2 V1.2 Aug2015
Request for Authorisation to undertake the setting and sealing of meter regulators on medium pressure installations with a badged capacity not exceeding 6m³/hour.

ENA - GT2 Form C3A V1.1 Jan2014
Request for Authorisation to undertake the setting and sealing of meter regulators on low pressure, standard, installations with a badged capacity exceeding 6m³/hour but not exceeding 40m³/hour (standard pressure service)

ENA - GT2 Form C3A V1.2 Aug2015
Request for Authorisation to undertake the setting and sealing of meter regulators on low pressure, standard, installations with a badged capacity exceeding 6m³/hour but not exceeding 40m³/hour (standard pressure service)

ENA - GT2 Form C3B V1.1 Jan2014
Request for Authorisation to undertake the setting and sealing of meter regulators on low pressure, standard, installations with a badged capacity exceeding 40m³/hour but not exceeding 1076m³/hour (standard pressure service)

ENA - GT2 Form C3B V1.2 Aug2015
Request for Authorisation to undertake the setting and sealing of meter regulators on low pressure, standard, installations with a badged capacity exceeding 40m³/hour but not exceeding 1076m³/hour (standard pressure service)

ENA - GT2 Form C4A V1.1 Jan2014
Request for Authorisation to undertake the setting and sealing of the meter regulator, associated pressure control and protection devices on a low pressure, non-standard or higher pressure installation with a metering pressure of 21 mbar.

ENA - GT2 Form C4A V1.2 Aug2015
Request for Authorisation to undertake the setting and sealing of the meter regulator, associated pressure control and protection devices on a low pressure, non-standard or higher pressure installation with a metering pressure of 21 mbar.

ENA - GT2 Form C4B V1.1 Jan2014
Request for Authorisation to undertake the setting and sealing of the meter regulator, associated pressure control and protection devices on a low pressure, non-standard or higher pressure installation with a metering pressure other than 21 mbar.

ENA - GT2 Form C4B V1.2 Aug2015
Request for Authorisation to undertake the setting and sealing of the meter regulator, associated pressure control and protection devices on a low pressure, non-standard or higher pressure installation with a metering pressure other than 21 mbar.

ENA - GT2 Form D1 V1.0 Apr2013

ENA - GT2 Form D1 V1.0 Apr2013

ENA - GT2 Form D2 V1.0 Apr2013

ENA - GT2 Form D3A V1.0 Apr2013

ENA - GT2 Form D3B V1.0 Apr2013

ENA - GT2 Form D4A V1.0 Apr2013

ENA - GT2 Form D4B V1.0 Apr2013

ENA - GT2 Form D4B V1.1 Aug2015

ENA - GT2 Request for Authorisation to Install a Meter Bypass

ENA - GT2 Request for GT approval for meter housing / accommodation

Procedures

ENA - GT1 Version 1.2 January 2014

ENA - GT1 Version 1.3 Aug2015

ENA - GT2 Inspection Checklist V1.0 Apr2013

ENA - GT2 Procedure V1.2 January 2014

ENA - GT2 Procedure V1.2 Aug2015

ENA - GT2 Procedure V1.2 Aug2015

ENA - GT2 Version 1.0 Apr2013

ENA - GT4 Version 1.0 Apr2013

For further information please contact your relevant Gas Distribution Network Operator