ENA Type Test Verification Report Register

The ENA Type Test Verification Report Register enables all visitors to access the Type Test Verification reports as required by Engineering Recommendations G83 & G59, and G98 & G99 for products related to small scale electricity generation in the UK market including PV panels, wind turbines, CHP Units etc upto 50kW.

Energy Networks Association (ENA) has developed and hosts the site in order to promote product identification and information sharing but it is the responsibility of the product manufacturers to upload and maintain data and documentation relating to their products. Similarly, it is the responsibility of the connection agreement holder to ensure their manufacturers product is compliant with the required specifications.

ENA is not responsible for the accuracy or validity of the product information held on the register. ENA do not act as a certification body and the presence of a manufacturers device on ENA’s type test register does not indicate whether the device is indeed compliant to the required specification or not.

Please note that on or after 27 April 2019 only equipment compliant with G98/G99 will be accepted for connection to the networks due to the European Network Codes Requirements for Generators (RfG) legislation coming into effect. Manufacturers are asked to ensure that they register their equipment on the new G98/G99 Type Test Register in preparation for this. 

Please click here to enter the new G98/G99 ENA Type Test Verification Report Register.

EREC G98/1-2 (2018) - Type Test Verification Report

EREC G99/1-3 (2018) - Type Test Verification Reports 

Please click here to enter the old G83/G59 ENA Type Test Verification Report Register.

G83/2-1 (2018) Appendix 4 Type Test Verification Report

G59/3-4 (2018) Section 13.1 - Type Test Verification Report